Here are the steps to hard reset your Deskjet printer ink level.
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
Comments
Post a Comment